Check for media scraps inside the printer. Page 98 Symptom Cause Abnormal The imaging unit may areas be old or damaged. If not, download it to profile your printer. Page 68 Push down on the two tabs until they click to lock the transfer roller cartridge into the printer. The posting of advertisements, profanity, or personal attacks is prohibited. When the front cover is opened, the fuser temperature drops gradually one hour wait time.

Uploader: Talmaran
Date Added: 16 December 2009
File Size: 39.77 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 42729
Price: Free* [*Free Regsitration Required]

Attention Be careful not to touch the transfer drum while removing jammed media. Improperly adjusted guides may cause poor print quality, media jams, or printer damage. Remove the used imaging unit. Reinstall the controller board. Mac OS X Introduction Do not oil, lubricate, or disassemble the printer.


Duplex 2-sided printing can be done automatically with enough memory installed. Symptom Cause Irregular The media is moist from humidity or print or having water spilled mottled on the paper supply.


The printer memory is insufficient. The tray extender supports long media. Media is flat, especially on the leading edge. Replacing the Fuser Unit A consumable is an item that needs to be replaced at regular magicolog. Semiconductor laser with rotating mirror Recorder: Doing so may damage the printer and cause the print quality to deteriorate.

For information about media recommended for your printer, go to www. Because the time-of-day clock includes an internal battery, there is a danger of explosion if the clock is incorrectly installed or replaced.

The image The media is moist comes off from humidity.

Attach the internal IDE hard disk drive to the bracket with the grooved- end of the bracket facing the ribbon cable. Check to see if the media width guides are correct. The printer is on a hard, flat, level surface.

Optional Fonts These fonts can be printed at a variety of point sizes and in differ- ent styles and resolutions. Replacing The Transfer Unit Magicolod the tabs at both ends of the transfer cartridge c and gently lift it d out of the printer. Print a startup page. Do not dispose of it by burning. Use media that is approved for your printer.


Konica Minolta Magicolor 3100 User Manual

Duplexing Select paper with high opacity for duplex 2-sided printing. The printer is Wait. Status and Error Messages This message URL is the web address of the file you wish to print to the printer, for example: Remove and reinstall installed correctly. See the CrownBooks for more information.

Page 96 Symptom Cause Small The media is is too marks dry. Upper 28 Upper media tray 41 Ventilation grillesVMS compatibility Waiting for idle message Waiting qmms idle status message Warming up message Warm-up time Wrist strap for antistatic protection Zip drive Index Put the printer on a flat, hard, level surface not to exceed 1.

Print a status page. Open the front cover button A.